Spot Bonding of Tile & Stone Veneers and Facades at DesignEX

Click on image to enlarge

Click here for more info on DesignEX

Technical Presentations at DesignEX in Sydney

Click on image to enlarge

Spot Bonding

Click on image to enlarge

Our Productivity Message in Australia

Click on image to enlarge

Click here for more info

Latapoxy 310 Spot-On

Click on image to enlarge

Do you have one of these ?  Would you like one ?  Send me an email: hbrothberg@laticrete.com

Spot Bond Stone Veneer

Click on photo to enlarge

Latapoxy 310 Spot bonding of 2' x 4' granite to CMU walls
5 Farrell Place, Civic, ACT Australia
Click here for more Latapoxy Spot Bond information

FAST Stone Facade Installation

Click on photos to enlarge

Project: Stone veneer Facade.  No "Hooks or Mechanical Anchors"
Builder: Pimas Gale
Contractor: Marsh Contracting
Location: William Street, Double Bay, Sydney Australia
Click here for more information
LATAPOXY 310 Stone Adhesive is a high strength epoxy adhesive. Engineered & formulated for the spot bonding fixing method of tile and stone installations on vertical surfaces. Latapoxy 310 Stone Adhesive maintains its non-sag consistency at high working temperatures up to 95°F (35°C). Latapoxy 310 is extremely fast and productive to use.  Allows for faster installations of large tile and stone when compared with the older conventional "hooks or mechanical anchors method."

One of the best addresses in Sydney

Click on photos to enlarge

This job has LATICRETE Productivity stamped all over it.

Most of the units and their extensive stone and tile work were done with LATICRETE materials. These include HYDRO BAN, 253 Gold, 4237/211, PERMACOLOR grout and 3701 mortar.

The above photographs show the stair lobby wall which starts in the basement and extends upwards to a long narrow skylight along the width at the top. The wall is only interrupted by the canter-levered stair case which is cast showing the profile of the tread and riser only.
The large format limestone panels (2' x 4' & 1' x 4') on this wall were fixed to the concrete wall with LATAPOXY 310 stone adhesive by the "Spot Bond Method" which eliminated slow, labor intensive mechanical fixing of the stone. The Pietra Grey Marble installed on the stairs and landings were bonded with LATICRETE 4237/211W.

Project -
Residential Units 62 Wunulla Rd Point Piper - this is regarded as one of the best addresses in Sydney.
Contractor - 3D Tiling.
Builder - Pimas Gale.

Fred
Fred Gray
Technical Service Manager
Laticrete Australia
fgray@laticrete.com.au

More - Productivity Installing Stone Veneers

Click on photos to enlarge

Click here to watch the video

Productivity Installing Stone Veneers

Click on images to enlarge

LATAPOXY 310 Stone Adhesive is a two component high strength epoxy adhesive. Engineered for the spot bond installation method of tile and stone installation on vertical surfaces. LATAPOXY 310 Stone Adhesive maintains its non-sag consistency at high installation working temperatures up to 95°F (35°C).
Click here to watch the installation video
Click here for more info

Stone Masonry Veneer Jobsite in Brisbane

Click on photos to enlarge

Message & photos from Nick, one of our key LATICRETE people in the field in Queensland Australia:

"Hi Henry, I ran into this fellow on a high end residential site today. He remembers meeting you a few years ago at Tilers Express and wanted me to say hello to you.
He is currently using LATICRETE MVIS adhesive mortar and LATAPOXY 310 Spot Bond materials on a large residential project in Hawthorne (south side of Brisbane).
Nice guy and he only uses high end materials as he knows they work!"

Our masonry veneer installation system includes sealants and a variety of products including: air and water barriers, adhesives and pointing mortars. Learn more about the entire product line, find testing reports and request brochures.

LATAPOXY 310 Stone Adhesive

Click on photos to enlarge

Message received from a California Tile contractor:
Henry
I wanted to tell you my experience with the 310 spot bond system.
We used it on an interior vertical job of about 4000sq.ft. of 24x24 inch porcelain that went up to 40ft. in height.
It was the perfect system for this application. The guys were able to produce much more than expected and the job turned out so well that the owner was glad to have us do another building that was identical to the one I'm taking about. Please feel free to quote me on my experience with this.
Loren
Rucker Tile
OK, so what is Latapoxy 310 ?
A two component, high strength epoxy adhesive. Engineered, formulated and optimized for the spot bonding fixing method of installing tile and stone on vertical surfaces. Latapoxy 310 Stone Adhesive maintains its non-sag consistency at high working temperatures up to 95°F / 35°C. Interior, exterior, wet areas, walls, ceilings and soffit. Latapoxy 310 Rapid Stone Adhesive is also available. This Fast Permanent Bond sets in 5-8 minutes.

Click here for more info or to watch an installation video

Latapoxy 310 Spot On

Click on images to enlarge

Who wants a sample ?  Send me an email: hbrothberg@laticrete.com